KOWOTEST
KOWORASE X Eraser for IP
Manufacturer product description
External eraser for computed radiography imaging plates that works in two phases: UV exposure to saturation, then LED erasure. The source page gives a 490 x 370 mm active erasure area and a cycle time of about 3 to 6 minutes depending on plate condition.
KOWORASE X Eraser for IP
- Brand
- KOWOTEST
- Category
- RT / Dark Room / CR Eraser
- Method / product family
- Model
- 12 39050
Technical Specifications
| Article No. | 12 39050 |
|---|---|
| Housing | stainless steel |
| Drawer | 500 x 400 mm (W x D) |
| Active Erasure Area | 490 x 370 mm (W x D) |
| Imaging Plates (IP) per erasing process – examples | 1x 14 x 17 inch (35 x 43 cm); 2x 15 x 48 cm; 3x 10 x 48 cm |
| Light source phase 1 – exposure | UV-CCFL 250 nm – 40 W |
| Lifetime/ cycles – phase 1 | 25.000 h ≈ 500.000 |
| Light source phase 2 – erasure | LED 6500 K – 80 W |
| Lifetime/ cycles – phase 2 | 30.000 h ≈ 500.000 |
| Controller | TI484801 – Dual-Prozess-Timer |
| Power Supply | 90 … 260 V / 47 … 63 Hz / 90 W |
| Dimensions | 58 x 48 x 39 cm (W x D x H) |
| Weight unit | 29 kg |
Technical specifications are taken from data published by the supplier; refer to the supplier source for final and binding values.
Product Documents
No verified product document has been published for this product yet.
Request a product quote
Add the NDT and PWHT equipment, consumables and spare parts you wish to purchase to your product quote list.