KOWOTEST
KOWOTHERM K20 Film Drying Cabinet
Manufacturer product description
Film drying cabinet with an anodised aluminium frame, stainless steel walls and a microprocessor controller for temperature and time. The K20 has one drawer rack (up to two possible); the source page lists a 20 … 40 °C setting range and a 5 micron inlet filter.
KOWOTHERM K20 Film Drying Cabinet
No product image is published at the supplier source for this item.
Data note: Official listing shows only the site's 'Pictures following soon' placeholder; no product image is available.
- Brand
- KOWOTEST
- Category
- RT / Dark Room / Film Dryer
- Method / product family
- Model
- 12 31050
Technical Specifications
| Article No. | 12 31050 |
|---|---|
| Housing – frame | Aluminum profile, anodized |
| Housing – walls | stainless steel |
| Controller | micro processor controller for temerature and time |
| Heating | 1.000 / 2.000 W – selectable with switch |
| Temperature range | 20 … 40°C – selectable with controler |
| Air filter inlet | fine fliter -5 micron |
| Air volume flow | 60 m³ / h |
| Power supply | 230 V / 1 Ph / 2,5kW (11A) |
| Air exchange rate | 310 per hour |
| Drawers | 1 (up to 2 possible – accessories) |
| Number films – max. 35 x 43 cm | 20 – in single channel hanger |
| Number films – max. 15 x 48 cm | 60 – in tripple channel hanger |
| Dimensions drying chamber | 570 x 470 x 720 mm (WxDxH) |
| Dimensions external | 650 x 550 x 1200 mm (WxDxH) |
| Weight | 56 kg |
Technical specifications are taken from data published by the supplier; refer to the supplier source for final and binding values.
Product Documents
No verified product document has been published for this product yet.
Request a product quote
Add the NDT and PWHT equipment, consumables and spare parts you wish to purchase to your product quote list.