OKOndt Group

Calibration Blocks for Holes Testing

Manufacturer product description

Eddy current Calibration Blocks for Holes Testing

Brand

OKOndt Group

Category

Eddy current calibration blocks

Method / product family

Table 1 — Length, mm/in.	Defect parameters: Width, mm/in. \| Roughness of operating surface, µm: Depth, mm/in.
Table 1 — RS2353.12-5 H/0-FLN/0.5/AL	Defect parameters: Full length \| Roughness of operating surface, µm: 0.1 / .004 \| Overall dimensions, mm/in.: 0.5 / .02 \| Material: 0.63 \| Field of use: 150 x 50 x 10 / 6 x 2 x .4 \| Note: Aluminium alloy \| Column 8: Aircraft, power, transportation, engineering industries \| Column 9: Rectangular calibration block with several holes
Table 1 — RS2353.12-1 H/0-CN/0.76/AL	Defect parameters: 0.76 / .03 \| Roughness of operating surface, µm: 0.1 / .004 \| Overall dimensions, mm/in.: 0.76 / .03 \| Material: 0.63 \| Field of use: ø 24 × 10 / Ø1 x .4 \| Note: Aluminium alloy \| Column 8: Cylindrical calibration block with one hole

Technical specifications are taken from data published by the supplier; refer to the supplier source for final and binding values.

No verified product document has been published for this product yet.

Request a product quote

Add the NDT and PWHT equipment, consumables and spare parts you wish to purchase to your product quote list.