Guided Ultrasonics
QSR System – QSR Axial
Manufacturer product description
QSR ® Axial is a low‑profile device designed to fit snugly into tight spaces near pipe supports and in pipe racks. It combines with the QSR1 ® electronics pod (ePOD) to send guided waves axially along a pipe, while moving circumferentially around it as described in the Axial QSR ® overview page . This orientation allows even further applications for the QSR Scanning System , like clamped supports, wall penetrations, and air‑ground interfaces.
QSR System – QSR Axial
- Brand
- Guided Ultrasonics
- Category
- Inspection / Scanning / QSR System
- Method / product family
- Model
- QSR Axial
Technical Specifications
| Clearance (Sensor) | Less than 28 mm (1.1″) |
|---|---|
| Clearance (Traction Unit) | Less than 85 mm (3.4″) |
| Nominal Pipe Size (Manual Scan) | 4″ to 48″ (DN 100 to 1200) |
| Nominal Pipe Size (Motorized Scan) | 6″ to 16″ (DN 150 to 400) |
| Operating Temperature | -20°C to 70°C (-40°F to 160°F) |
| Pipe Thickness | 6 mm to 13 mm (0.236″ to 0.512″) |
| Surface Preparation | Surface must be wiped clean of loose debris. Coatings thicker than 1 mm must be removed under the sensor path. |
Technical specifications are taken from data published by the supplier; refer to the supplier source for final and binding values.
Request a product quote
Add the NDT and PWHT equipment, consumables and spare parts you wish to purchase to your product quote list.